E46 Fanatics Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
70 Posts
No, it won't work on 99-00 models. Only 01 and up. The earlier ones have to have the pins on the gong connector (where you hook to tune the ECU) under the hood jumpered together.

AWESOME JAKE!!!! :excited:
wish i knew this before i started. i now have the idle control valve seperated from the engine, but cant remove it. i need to reattach it and would appreciate any advice on doing this with the throttle cable in the way, otherwise i'll need to tow it
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top