E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
727 Posts
Discussion Starter · #1 ·
forgestar f14

18x12+35 rear 305 mt street II
18x9+25 front 255

first question, are these wheels ****? second question, can i fit w/o rolling my fenders? suspension is stock
 

·
Registered
Joined
·
3,395 Posts
Probably not the rears. 11's are the widest HPF could go and I might still have to roll my fenders a tiny bit.
 

·
Registered
Joined
·
1,510 Posts
12 inch rim is to wide for a 35 offset, the widest Id go with a 35 offset is 11, with that offset and that rim you will very likely rub the trailing arm. Derek, with the 11 inch rim it actually makes the 305 wider. if you run a smaller rim it would make the tire taller and not as wide so you wouldnt need to roll the fenders
 

·
Registered
Joined
·
0 Posts
You can squeeze an 19x11 +33

I helped a few people on M3Forum do it back then. You'll need to run a stretched tire, camber, roll, a spacer and all that mess hahah.
 
1 - 4 of 4 Posts
Top