BMW E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Manwhore
Joined
·
2,799 Posts
Discussion Starter #1
Im looking into these japanese rims, and i was wondering if i got 19x9.5.. what would i need the offset to be to fit my 330ci? Also what offset for the 19x8.5.

Hell while im asking, what offset would i need for a 19x10? :confused:
 

·
"DPErt-ASchnizA-*****"
Joined
·
6,581 Posts
mine are

19x8.5 ET38

19x10 ET44
 

·
"DPErt-ASchnizA-*****"
Joined
·
6,581 Posts
There are other wheel makers out there that may have diff specs.

DTM Kreuz 19x10 wheels have ET of 46. but the difference is only 2mm. which means the PG3 protrudes farther out than the Kreuz by a mere 2mms. Either way, both will cause rubbing issues when mounted with tires. make sure u roll.

I forget, but i think there is another maker that makes a 19x10 ET 42 and 19x10 ET40.
 
1 - 5 of 5 Posts
Top