E46 Fanatics Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
87 Posts
Discussion Starter · #1 ·
So i just installed my coils and I don't really like the way the car is sitting. I want to positive the camber in the back so the car sits flush, but I also need to get my fenders rolled. anyone know a place where I can get this done? I also need an alignment too :facepalm:
 

·
Registered
Joined
·
830 Posts
Sounds like he lowered his car,witch tilted the rear wheels in. So to align it to proper specs he must adjust them back out. But when he adjusts them out the tires will hit the fenders due to the drop.

Op,your rear arms may have enough adjustability in the stock cams,but if not you can get Turner Motorsports adjustable arms. Then you will need your fenders rolled to clear the tires if they hit.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top