BMW E46 Fanatics Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1 (Edited)
...that fasten the guard to the air dam at the front end. I think they are the plastic capture / quick release pin type.

Does anyone have a part number and/or tip for where I can get these things?

Here's a photo of the fastener in question:



Hugh
 

·
Registered
Joined
·
30 Posts
Discussion Starter #3
The problem with the fasteners at Autozone, are that without a part number, I have to use using trial and error to find the proper fastener. I've been thru a few so far with no luck...
 

·
Banned
Joined
·
1,956 Posts

·
Registered
Joined
·
4,971 Posts
I just bought something different to do that very same thing based on this parts drawing and listing from RealOEM.com

I bought a few of item #20 in the drawing.

$1.25 each at Pelican Parts.

Upon receiving them they appear to be identical to the existing screws holding my shield in place that are now getting rusty.


http://www.realoem.com/bmw/showparts.do?model=BM53&mospid=47712&btnr=51_3274&hg=51&fg=70
They don't cost 1.25 from pelican . . .much less i am sure.

Op just go the dealer. And get a few extra.
 
1 - 5 of 5 Posts
Top