BMW E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 3 of 3 Posts

·
Registered
Joined
·
720 Posts
Discussion Starter #1
Welp,

I finally gave in, and jumped at the chance to buy a set of OEM factory xenon light housing from a damaged 01 coupe. The damaged housing is still mountable, but I prefer using my current halogen housing to host the projector, if that's possible.

I ran searches on the forum, and only found posts about after market HID, or bi-xenon aiming type questions. I was hoping maybe someone could provide some information on pulling out the projector part from the factory light housing and mounting it in a halogen housing??


On a side note, is there a way to get auto-leveling function on the xenon projector, since I basically bought the OEM?? Or is manual beam-aiming the only way??

THanks for the help!!:bow: :bow:
 

·
Registered
Joined
·
720 Posts
Discussion Starter #2
anyone??
 

·
Registered
Joined
·
28 Posts
its tricky but once you open the housing you need to unscrew the adjusters all the way out, then with a little force pop the ball joints out then remember how it goes back together.
 
1 - 3 of 3 Posts
Top