[Rob B.]

The was a corruption in one of the files, its being reuploaded and I'll readd the instructions for it.
--

Sorry for delay for ISTA/P Instructions, I'll hopefully finish it by the end of this week.

Hi,

I just like to also Thank You for Ista+4.31 which works great, i have tested Ista+ on Windows 10 and BMW E90, E46 with k+dcan cable with switch all works as it should, installation instruction was straight forward. Tested WinKFP for updating modules on E90, inpa for diags, ncs expert for coding, tool32, ista+ all works really good. All i did just added SPDaten 69. Looking forward for instructions for Ista P install for programming. Once again Thanks.

 

[Rob B.]

Hi,

I just like to also Thank You for Ista+4.31 which works great, i have tested Ista+ on Windows 10 and BMW E90, E46 with k+dcan cable with switch all works as it should, installation instruction was straight forward. Tested WinKFP for updating modules on E90, inpa for diags, ncs expert for coding, tool32, ista+ all works really good. All i did just added SPDaten 69. Looking forward for instructions for Ista P install for programming. Once again Thanks.

EDIT: Sorry i meant Ista + 4.32.15 version.

 

[Rob B.]

EDIT: Sorry i meant Ista + 4.32.15 version.