E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 2 of 2 Posts

7 Posts
Discussion Starter · #1 ·
How do you reset oil change mileage?
I tried this but it was no go..

From the Bentley Service Manual:

1.The ignition key must be in OFF postion.
2.Press and hold trip odometer button on instrument cluster, and turn ignition key to ACCESSORY position.
3.Keep button pressed for approximately 5 more seconds until any of the following appear in the display: "Oil Service" or "Inspection", with "Reset" or "Re".
4.Press button again and hold for approx. 5 seconds until "Reset" or "Re" flash.
5.While display is flashing, press button briefly to reset Service Indicator.
6.After display has shown new interval, the following will appear in display for approx. 2 seconds: "End SIA".
1 - 2 of 2 Posts