BMW E46 Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
133 Posts
Discussion Starter #1
so i was using a flat-head screwdriver to lift the back of the side lights (to replace with these clears)...
i learned from other people's advice - to use a rag over the tip of the screwdriver.
i had a terrycloth-type rag, so i used it.
but it clearly didn't help!
the tip went through the rag, and across my car! shiza!! :ben:
:banghead: :cry:

so where do i begin - to repair this scratch??:dunno:

ps - on the other side of the car, i used my t-shirt to cover the tip of the screwdriver. i thought it would be stronger. it wasn't - the screwdriver made a small rip in my shirt! :tsk:

 

·
First 19" ZHP
Joined
·
1,460 Posts
try using meguairs paint cleaner then paint polish and it should come right now
 
1 - 3 of 3 Posts
Top