BMW E46 Fanatics Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
863 Posts
Discussion Starter #1
How do you remove the glove box?
I did a search in the DIY forum... but nothing turned up...
Anyone have a diagram?

I've taken all the top front screws out, two screws behind the door latches and 4 that are part of the hinge for the door underneath... Its still stuck in there... It seems like I'm missing one screw somewhere....

thanks!
 

·
Registered
Joined
·
1,268 Posts
Check out the DICE install DIY. It has very detailed removal instructions (although I will say that there was some variation between the screws in my year vs. the one shown in the guide).
 

·
Registered
Joined
·
863 Posts
Discussion Starter #5
Try this. Scroll down to the Glove Box removal section. These instructions worked for me when I replaced the final stage resistor.

http://www.circlebmw.com/service/access/9410794.htm

Michael
I removed the 6 screws the diagram shows but it says nothing about the straps... It Still wont budge and I don't want to break anything... Do i even need to take the door off or will the whole glove box and door slide out?

Arr!
 

·
Registered
Joined
·
863 Posts
Discussion Starter #9
Thanks everyone for all the info above...

NOW: HOW DO YOU REMOVE THE "plate with floorboard light"

ARRR!!!
 
1 - 10 of 10 Posts
Top