BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter #1
Today when I was changing the xenon light blub and I twisted it too hard and broke the red thing that plug into the back of the xenon blub. :sad:

I broke it and put everything back together and the light still working, i figure is because the cover thing is holding the plug in place. But I am afraid that since the plug is now broken and lose, the connection is not perfect and someday it will just fell out :dunno:

I wonder if i can just replace that red plug thing or i have to replace the whole ignitor or i have to replace the whole xenon housing?

:sad:
 

·
Registered
Joined
·
96 Posts
Discussion Starter #3
I am sure coz there were broken red piece on my hand when I broke it :( and I was like sxxt this is not gonna be cheap.
 

·
Flying Monkey Herder
Joined
·
443 Posts
doh. you could get a set of new end connectors and splice them in.
i picked up a set of two for my retrofit ballasts for around 25 bucks.
www.misterjung.com

his other stuff is sketchy as hell, but its pretty hard to mess up a D2S connector
HTH
 
1 - 4 of 4 Posts
Top