BMW E46 Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Looking to see if there is anyone in the SF Bay area willing to help or if there is a good online guide detailing what I would need to do to edit the bin for a 2005 330i ZHP to remove the 2 downstream O2 sensors. I am getting both codes P0420 and P0430 and need to get the car through smog with plans to sell it.

I checked this thread: MS45.1 Readiness with Catless Headers SOLVED

...but noted the part about needing the latest DME flash, and have no idea where to get that. I have some experience with flashing on my e53 but it's been a while.

Last thing I would want to do is brick the dme and have to recover from scratch. Alternately if there is a local shop that can do this for a reasonable cost that is an option too.

Appreciate any help you can provide, thanks all
 

·
Registered
Joined
·
580 Posts
DM my Instagram @tunedbydaniel. I can get you sorted remotely.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
11 Posts
Discussion Starter #3
DM my Instagram @tunedbydaniel. I can get you sorted remotely.
Thanks d_cleverzz, if I can't find someone local I may reach out.

Does anyone know what the latest version of the software would be for the 45.1 dme on the zhp? If can tell whether I have the latest I can likely do the partial bin edit and flash myself.
 
1 - 3 of 3 Posts
Top