[BlackBmmer12]

Bought kw v2s about a week ago for a non-m 2002 325 ci. installed them and dropped them all the way down to really see how low kw's go. well what am i doing wrong that it only goes this low? i've got it dropped down all the way remember. PLEASE HELP!!

sorry for the poor pictures they were snapped by my phone quick. thank you

 

[BlackBmmer12]

Using sport camber/caster plates on top.

 

[Junaid]

installation error maybe? is the strut sitting properly in the spindle?

 

[BlackBmmer12]

Yes just took off both sides to Check that and both sit in there as far as they should

 

[BlackBmmer12]

I thougt install error also. But I've been back and forth redoing all of it and idont c where I went wrong.

 

[Junaid]

if you raise it, does the car go higher?

 

[BlackBmmer12]

Initially we did, and it sat 4 x4 style. So we slammed n it came out like that. On damning we are 4 clicks soft from center. Would it settle more the softer you go?

 

[Junaid]

yes if you just installed it, they will still need to settle, but imo it should be going lower then that

 

[BlackBmmer12]

Yes, I was looking and excited to see how low it would go. And it ended up that way.

 

[cyberkaa]

This is what my V2s look like on the lowest thread. Wheels are 18s, front tires are 225/40.


IMG_6932 copy by cyberkaa, on Flickr

Mine did settle a little so drive on them for a week and see if anything changes. Taking the helper springs out will drop them a little more. It's also possible that you were sent the wrong springs so post up a pic of the markings (if any) and maybe we can compare.

 

[BlackBmmer12]

I'll post up the markings tomorrow. Check back on here. I thought they would go lower