E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 3 of 3 Posts

·
Registered
Joined
·
243 Posts
Discussion Starter · #1 · (Edited)
UPDATE: Found it!

It's the one that goes in from the side, near the top of the expansion tank chamber, where it transitions to the neck.

yee ha :)

M
=================
So, I am almost done with my cooling system rebuild, and I have one Torx T-25 screw left over. I believe there were 3 short ones and one long to start. I have the long one in at the top of the radiator, passenger side, one short one at the top of the radiator, driver side, and one short one at the bottom of the vertical bracket that the expansion tank assembly mounts to.

Where does the 3rd short one go?

I've searched a bunch of DIYs, realoem, etc, to no avail.

I don't feel good about leaving it out!

Thanks in advance.
 

·
Registered
Joined
·
243 Posts
Discussion Starter · #3 ·
I believe I took out 4 total T-25 Torx screws, one long one and 3 short ones.
I have the long one, and 2 short ones in place.
1 short one on my workbench.
 
1 - 3 of 3 Posts
Top