E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter · #1 · (Edited)
Does anyone have the H&R Cupkit and absolutely had to do fender rolling? I just bought the kit and I dont' have experience with BMW being lowered. I was wondering if I would have to roll the fenders.
I have CSL Reps, Staggered Setup, 245-35-19's in the rear. (I think gotta check after work). rear tires are stretched , don't ask the dude I bought them from had the tires on it.

I came from the ACURA/Honda group and my civic had a negative camber correction kit but never wear from the outside.

Thanks for reading, if you just have some advice let me know. I haven't installed the kit yet so no pics right now.
 

·
Registered
Joined
·
7,421 Posts
If you have non m offset wheels with a 245 tire in the rear, you will not have rubbing issues.
 
1 - 2 of 2 Posts
Top