E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 3 of 3 Posts

·
Registered
Joined
·
282 Posts
Discussion Starter · #1 · (Edited)
SOLD SOLD SOLD SOLD SOLD









Ended up not using these, new in wrapper,T304 stainless steel headers, test fitted by Chris(///M3AN ONE on M3forum), all adjustments already made to ensure these line up, same from his GB but not coated, comes with new oem header install kit complete with longer e36 studs.






Info on the headers: (from original seller)
These are JVT/SS V2 rep headers with the thicker flanges. You will have to swap your studs to the longer E36 studs which I will include. They are made from T-304 Stainless Steel and have 4 bungs for 02's and 1 bung for the EGT. I make all the adjustments to these so they will line up no problem! I re-weld the two 02 bungs on the shorter header so they will clear the heatshield. I also make a groove on the longer header near the bottom so it will clear the FCAB. These have strong tig welding, a 3-2-1 design, mandrel bent piping and CNC machined flanges.
 
1 - 3 of 3 Posts
Top