BMW E46 Fanatics Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
6,060 Posts
Discussion Starter #1
$50 obo. GC is out of stock as of now.. this one is in pretty much new condition.

http://www.ground-control-store.com/products/description.php/II=501/CA=103

Patented airflow straightening device for the stock e46M3. Nicknamed "The Gizmo" during early development, the name has stuck. Dyno proven gains ranging from 4-7 hp have been reported, along with a noticeable gain in driveability


 

·
Registered
Joined
·
1,015 Posts
find out if it fits a K&N 63 intake and i'll be interested

I believe the K&N 63 does not require the screen as some of the other intakes do.
 

·
Registered
Joined
·
6,060 Posts
Discussion Starter #4
I believe the K&N 63 does not require the screen as some of the other intakes do.
Thanks for the input.. didn't know that.

I'm not sure if it fits the 63, but I'll try and find out.

From my knowledge, a screen/filter is recommended on all intakes, which is why stock vehicles usually have a mesh before the MAF to straighten air flow. The factory designed screens are cheap and probably a bit restrictive, but they get the job done, which is why GC made this higher quality, better flowing piece.
 

·
Registered
Joined
·
2,349 Posts
The Gizmo was discontinued by GC. Dont know why! I got one :D
 

·
Registered
Joined
·
760 Posts
It says "for the E46 M3", but is it known if this works on other E46's, replacing the stock MAF screen?
 

·
Registered
Joined
·
21 Posts
pm sent
 
1 - 10 of 10 Posts
Top