E46 Fanatics Forum banner

FS: ESS M54 Engine (non M) Custom SAMCO Intake Boot

3K views 6 replies 4 participants last post by  busin 
#1 ·
Hi Guys,

Those with the ESS Blower for the M54 Engine...

A while back I had SAMCO in the UK develop this boot kit (as the ESS part was a bit crude looking in the engine bay).

This kit is 3 pieces and used BILLET barb fittings on the "L" piece and also on the top of the main boot...

Silicon.

$200 USD per kit. Plus SHIPPING. (I had to fork out for the mould cost so I ain't making any $ on this...) I had to make 10 sets to get it done...

I have them in BLACK and also RED.
Please email me at; bwalsh@visionaire.com.au
 

Attachments

See less See more
2
#4 ·
I'm interested to know too. The ESS boot had to be trimmed slightly to get the angle right for the stock MAF location. Do these have to be trimmed too?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top