E46 Fanatics Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
175 Posts
Bushings

Tim, you're the man. I wish you had this DIY like 6 months ago. I had bought OEM ones along with the control arms and replaced them, and still I have a shake in the steering wheel everytime there's a rapid application on the brake pedal...the dealership checked the bushings three times afterward, and they tell me everything looks fine..
Great write up, definitely needs to be added to the Tech section. Thank yu for your time and for sharing this awsome write up.
:thumbup: :thumbup: :thumbup:
 

·
Registered
Joined
·
175 Posts
Control Arms

The Bushings could be bought aftermarket not the control arms. I bought control arms and bushings from the dealership when really all I needed to replace was the bushings. At that time, there were no aftermarket bushings and I just wanted to get rid of the vibration, so I replaced both control arms and bushings. Not a smart move!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top