Nice writeup!
I did experience a problem with these bushings under hard driving. The inner sleeve actually pushed up the control arm a bit under load and stayed up there. The result was that the inner sleeve was no longer seated properly in the delrin outer portion. Not sure how to solve it. I may make some sort of clamp that can prevent this from happening.
-Jason
I did experience a problem with these bushings under hard driving. The inner sleeve actually pushed up the control arm a bit under load and stayed up there. The result was that the inner sleeve was no longer seated properly in the delrin outer portion. Not sure how to solve it. I may make some sort of clamp that can prevent this from happening.
-Jason
