E46 Fanatics Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
207 Posts
Hello Tim....Great Job :bow:

Turning down the pipe cap...what do you think the most ideal OD would be

59MM or 58MM?


I will order the parts from Bimmer world after April 15th and tackle this job...not too difficult!! :thumbup:
 

·
Registered
Joined
·
207 Posts
ExoByte said:
What I mean is, will the replacement OEM 66 mm bushings and carriers fit on a car that has the 60 mm bushings and pre-0101 control arms?
I am in the same boat...the 66mm will fit in place of the 60mm!! I just ordered mine from the dealer! BMW part number 31126757623

Trieberg?? Just did this and he said that it was a fairly easy job! Make sure to follow Tim330i's procedure for torque specifications on the cross bars and carrier to body. :thumbup:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top