E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!
1 - 13 of 13 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
hello
has anyone got any idea on how to use the front fog light switch to control the angel lights... i have bought a set and about to install it...
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #5 ·
sorry im really noob

heres a pic .. what wires goes to wat ???


and waht about the fuse of the fog lights ?? will it work together with the angel lights ??
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #7 ·
but is the fuse the right one for the angel lights ?? the harness has built in fuse ?? or is it the right voltage for the angel lights when using fog light power ??? sorry im really not sure
 

·
Registered
Joined
·
135 Posts
First get 18g stranded wire, electrical tape, a solderer and solder. Extend the red trigger wire down to the driver side foglight and tap the yellow wire. Make sure to tape all connections at the end. Done
 

·
Registered
Joined
·
135 Posts
No fuse is needed for this b/c fogs are already fused. If he was coming from other location like ecu then I would recomend a 3amp fuse
 
1 - 13 of 13 Posts
Top