BMW E46 Fanatics Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2,231 Posts
Discussion Starter #1 (Edited)
Way back I got my LCM programmed to turn off day time running lights and just turn on my angel eyes.
Since that time I changed my fogs along with a new Mech2 bumper. The tech used a profile instead of addressing lighting functions individually.
Now I notice the fog switch turns on my high beams instead on my fogs (which I can't turn on at all). Fuse is fine.
Would you suggest I use a PA Soft kit? I like the fact my daytime running lights are off but would like to turn on the fogs.
Any suggestion or PA Soft steps appreciated.
 
1 - 1 of 1 Posts
Top