BMW E46 Fanatics Forum banner

241 - 260 of 260 Posts

·
Registered
Joined
·
104 Posts

·
Registered
Joined
·
104 Posts
Thanks!

Answered ;)
 

·
Registered
Joined
·
104 Posts
Anyone?<img src="http://s1.E46Fanatics.com/forum/images/smilies/excited.gif" border="0" alt="" title="Excited" class="inlineimg" />
I am in 11 psi with only methanol in a B25 if it is of helper for you.
What pulley size? I already upgraded my TS with custom made 77mm pulley and got almost 16psi peak with water injection
 

·
Registered
Joined
·
11 Posts
so i jumped the gun and bought a used ts2 for my e46 328i. it came with a 140(!!?)mm pulley, all the brackets (i think), no injectors and no tune (i started researching after i bought it). i have downloaded tunerpro and read/write software and are ready to try this myself. anyone got some tips? looking for a smaler pulley as vell..

anyone want to supply me with a "basetune" maybe? ms42

Not afraid of the car and want to do this as a learning experience (the car was cheap 4000nok).
 

·
Registered
Joined
·
104 Posts
looking for a smaler pulley as vell..
I have one spare brand new 83mm black anodized pulley for $80+shipping.

In the middle:


On the background:


Also, I can make a pulley of any size you need :thumbup:
 

·
Registered
Joined
·
104 Posts
How small of a pully can i safely run on a stock b30 internals? (on 98 octane euro gas, driven HARD)
I run on 77mm pulley on stock b30. Smaller isn***8217;t safe I believe.
 

·
Registered
Joined
·
104 Posts
what power does that make? Ran that setup for long? how high can you rev that on stock valvetrain?
didn't have dyno on the last config, but it looks like about 420+bhp (boost and racelogic numbers). ran that for a year, but I drive it only on trackdays, not daily. I rev it to 6800 (in the tune) but it revs to 7000 in reality. TBH it's better to leave stock 6500 redline, but I have 3.07 diff and ZF 5MT, so I can't measure 0-100kmh with 6500 redline :rofl:
 

·
Registered
Joined
·
8 Posts
Mine looks like it keeps to the stated 6800 that the ess tune is set to. I have a 3.64 rear end so would like some more revs sometimes, my s54 reved to 8500, so makes me miss a little wheelspeed straights between cornes sometimes, might have to straighten up or throw an extra manji in there. (It's a driftcar :D)
 

·
Registered
Joined
·
4 Posts
I see this thread mostly contains custom, smaller sized pulleys but im in need of a 90mm pulley for a 330i ts1 setup. If anyone has one or knows where to get one let me know. Ive tried contacting ESS and they have been a pain to deal with.
 

·
Registered
Joined
·
104 Posts
I see this thread mostly contains custom, smaller sized pulleys but im in need of a 90mm pulley for a 330i ts1 setup. If anyone has one or knows where to get one let me know. Ive tried contacting ESS and they have been a pain to deal with.
I have original ESS 90mm pulley used for 10kkm (see photo few messages above) for sale. Also I can manufacture new 90mm custom pulley.
 
241 - 260 of 260 Posts
Top