E46 Fanatics Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
I agree with you on all this. Also the op should be aware that if that mount tore out through the bottom there is tremendous downward force being exerted there. The metal under his fix plate is less than .060 thick and only one layer. Honestly will that hold? No
 

·
Registered
Joined
·
10 Posts
I see the drawing on that thread but it doesn't explain how the top bolt ataches to the mount. Either you drill and tap into it or weld something on top of it to screw into. I agree this would reinforce the mount location and could hold up for a while only if there is no significant tearing on the bottom. If there is a hole there and you can see the mount and move it by hand with the car in the air then no way is this fix going to hold.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top