E46 Fanatics Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hello! I'm going to be running a dual caliper setup for my Drift 330i.
I need to remove my rear abs sensor, in order to weld on my dual caliper bracket.
What would this disable besides ABS (obviously)?
maybe like Speedo, or odometer?

Thank you for anyone that replies! ;)
If anyone has any questions about my drift setup, I am here to help :thumbsup:
 

·
Registered
2004 330CI 6spd
Joined
·
588 Posts
The rear right wheel speed sensor feeds the speedo and odometer.

If you want the speedo working maybe connecting the rear right harness to a front sensor.


Sent from my iPhone using E46Fanatics
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
The rear right wheel speed sensor feeds the speedo and odometer.

If you want the speedo working maybe connecting the rear right harness to a front sensor.


Sent from my iPhone using E46Fanatics
Good idea E46Envyy, i think it just might work
I will definetly try this out and give an update on how it worked out.

:thumbsup: I appreciate the help!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top