E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 · (Edited)
So I was vacuuming out my car, and moved the driver seat quite forward.
I am now unable to move it back. The motors for recline, and thigh adjustment both work, they are in the same button.
I don't think there is anything in the tracks, and I'm just wondering if you guys know how to fix this or what I need to replace. Thanks a ton!

EDIT: so the switch itself actually works (i think), it clicks once I move the switch, then clicks again once I let it go,
it sounds like something electrical is happening so I dont believe the switch is the problem. There is a small covered wire that connects
to the yellow block thing underneath the seat, and it looks severed, however I cannot find anything it would connect to. I also checked
the passenger side and it doesent actually have this same connector.
 
1 - 1 of 1 Posts
Top