E46 Fanatics Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
The 1.2 bar cap for sure, turns out newer bmw designs are using this pressure rating on coolant caps as the industry standard is 1.0-1.4 bar for failure BEFORE catastrophic damage is done. 2.0 bar is just more pressure than is needed, but I wasn't aware of this solution until now. Cheers.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top