E46 Fanatics Forum banner
1 - 1 of 266 Posts

· Registered
70 Posts
THANKS for the very helpfull DIY newtuner! I pulled my starter out from the top as I was already replacing leaking lower intake hose. This DIY is great info and helped very much. Working from topside I found that a longer, 7 inches or more, 3/8 box wrench was a big help breaking loose the top starter bolt and a 3/8 box ratchet was a big help getting both off from above. Thanks again!
1 - 1 of 266 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.