E46 Fanatics Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
367 Posts
Just make sure that if you are going back in with the factory rubber, pre load the bushings with the brackets. ... it doesn't matter if you go with polyurethane. A lift definitely makes this much easier. .. although, I didn't have mine at the time. I made my own tool too, but it looks more like the standard tool.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top