E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13 Posts
not trying in anyway to take from a great thread...but i just replaced my rtabs and found using a whole saw bit..2 inches...worked great..just sawed out the rubber and then the aluminum race came right out. for those that dont have the puller. i put the power flex brand in..and you can just press them in..not much force is needed..or just love tap with a rubber malett.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top