BMW E46 Fanatics Forum banner

21 - 23 of 23 Posts

·
Registered
Joined
·
2 Posts
For some reason this mod didn't work for me. The signal going to the 611T & the switched power you can't really mess up, I have a feeling it may be in the wiring to the paddle outputs...I have the 2 terminals to the paddle outputs spliced in right above where the wires splice into the shifter connector.

I'm doing this on an e90 with retrofitted paddles. I know the 611T is working properly because I have the 335 paddles which you can push or pull. I have the pull functions smg style(left pull/downshift right pull/upshift) & I have the push function set to activate sport mode. I'm using the 611t to latch the sport mode.

For the push function to latch properly I had to set the 611T to 1,2,3 up with switch 4 down. Is this right for the pull both paddles function as well...

Any insight?




Sent from my iPhone using E46Fanatics mobile app
 

·
Registered
Joined
·
1 Posts
Hello, i'm looking for this mod i've buy the relay and 611T but my english is low,

So between the relay and the 611T only the green wire and 87 pin is connect, right?

pin 86 and red wire is connect together? Or it's battery + ?

And on the 611T have 4 switch what's up and down?

If someone have photo or schema please ^^

thank you
 
21 - 23 of 23 Posts
Top