E46 Fanatics Forum banner
41 - 60 of 116 Posts

·
• DFW •
Joined
·
1,894 Posts

·
• DFW •
Joined
·
1,894 Posts

·
Registered
Joined
·
1,855 Posts
WHAT DOES PO STAND FOR ? i use carsoft and i get error 106 vanos. there is a code on the list po106 is thi the same thing?
There is no P0106 code for your 323, but there is an internal BMW-FC 106 that returns:

'A' Camshaft Position Actuator Signal Low (Bank 1)
M52: 'B' Camshaft Position Actuator Tight or Jammed

That is probably what CarSoft is referring to.
 

·
Registered
Joined
·
60 Posts
Hey everyone has anyone gotton the code P1351, I know its suppose to be a misfire in C5 but, I reset the code and haven't had it come back up as a "service engine soon". So looking for the positive in everything, what do I need to do to fix the problem when it DOES come back??:huh:
 

·
Banned
Joined
·
1,759 Posts
Anyone know what an E code means?

I got E1510 and P0303 on the autozone scanner. P0303 is cylinder 3 misfire and I don't know what the E code means. I know P1510 is idle speed control valve but I know it said E on the scan tool. Any ideas??
 

·
Banned
Joined
·
1,759 Posts
^^^nevermind, i re-read the codes today and got P1510...but now i also have P1421 and P1423...bah!!! oh well i still love my bimmer :)
 

·
Registered
Joined
·
10 Posts
This seem to be the place to ask for help. I have the following codes:
P0171 System too Lean (Bank 1)
P0174 System too Lean (Bank 2)
P0313 Misfire Detected With Low Fuel Level
P1083 Fuel Control Mixture Lean (Bank 1 Sensor 1)
P1085 Fuel Control Mixture Lean (Bank 2 Sensor 1)
P1345 Misfire Cylinder 2 With Fuel Cut-off
P1351 Misfire Cylinder 5 With Fuel Cut-off
P1353 Misfire Cylinder 6 With Fuel Cut-off
 

·
Registered
Joined
·
0 Posts
damnit i have a grip of codes like fuel trim control lean bank one and two! can any body help with diag procedures?
 

·
• DFW •
Joined
·
1,894 Posts
N E 1 know what a code P0000 means??? :dunno:
 

·
Registered
Joined
·
727 Posts
I just found out that my car was spitting out the P0070 code, which is an Ambient Air Temperature Sensor Circuit issue. Can anyone tell me what the part number is and where it is located so I can check whether or not I can salvage the existing part? Thanks, and oh pictures of where it is would be a GREAT help.:bow:
 
41 - 60 of 116 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top