BMW E46 Fanatics Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
101 Posts
Discussion Starter #1
Hey everyone. I wrote up my install of a mute switch and concealed display for my Valentine1 radar detector I just did.

It is a little short on pictures of wiring from the sunroof area to the dash since I had already wired it to the A pillar a few weeks ago but I included instructions for it anyway.

It also includes the schematic and parts list for making a switch if you are competent with a soldering iron.

Anyway, I put it on my blog since I can go back and edit it a bit easier. Hope nobody minds.

Here it is, http://blog.namreh.com/2009/05/16/bmw-e46-displaymute-install-for-a-v1/

Let em know if I need to add anything. I did the writeup from memory and didn't think about pictures of taking the stuff apart since I had done it before.
 
1 - 1 of 1 Posts
Top