E46 Fanatics Forum banner
1 - 1 of 1 Posts

81 Posts
why dont you replace the pressure plate it self ?..
...wants to waste his time and be foolish at the same time? You need a new plate every time you do a disc.

If you buy a clutch set than you will get a new clutch with the pressure plate already setup. Only you have to do is remove the new diaphram when the installation is complete.
...exactly I suppose this is good if you had your clutch apart and didnt want to do a clutch, but then I think its ~300 for a clutch so best to replace it since you're in there.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.