E46 Fanatics Forum banner
1 - 1 of 89 Posts

· Registered
1,190 Posts
For the fan you will need tools that hold the pulley and righty loosy the nut with thin 36mm. Just one blow clockwise and it will loosen up. The lower radiator. It took me 4 hours until I figured it out. I cut the hose then cut the outer plastic end part of the hose but be careful not to go all the way and messed up the radiator ****. I did 3 vertical indentation to the plastic and then just pry it with your screw driver. It was so easy. If you cannot pull the expansion tank, place your jack underneath the exp tank and have some wood (i used my rubber mallet) for extension and jack and jack it for few inches and release the jack, wella you loosen up the exp tank and just pull it.
1 - 1 of 89 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.