E46 Fanatics Forum banner
1 - 1 of 1 Posts

19,221 Posts
Discussion Starter · #1 · (Edited)
Follow this guide to install the BMW Standard Tools software, which includes NCS Expert.

The guide walks you through coding a used Bosch 5.7 ABS module for an E39, but the process is the same for E46.
The steps are the same, except the following:
  • Step #5: choose E46 instead of E39
  • Step #6: choose KMB (pre-09-2001) or AKMB (03/2001+) instead of IKE
  • Step #9: choose DSC instead of ASC5
After you are done you likely will need to reset the steering angle. Follow this guide for that.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.