E46 Fanatics Forum banner
21 - 40 of 44 Posts

·
Registered
Joined
·
6,553 Posts
Discussion Starter · #26 ·

·
Registered
Joined
·
63 Posts
nice job with the DIY and writeup. sweet
 

·
Registered
Joined
·
86 Posts
Only thing I can think of that I would do differently is the interior handle LED location. I would install them on the top side of the handle cavity. This way it is more ambient and non direct.
Fantastic write up though.
My car goes into storage soon so I will likely bookmark this for a spring project.
 

·
Registered
Joined
·
88 Posts
i just completed doing this mod to my car. however i wired it up slightly differently as i only did it for the outside handles. I found it wasnt neccessary to take out the back seat but just tap into both individual footwell lights and wire the doors on the corresponding sides!

heres what i did: Drawing Sketch Design Diagram Artwork


and heres the result:
Automotive lighting Blue Black Light Headlamp


Blue Light Lighting Electric blue Cobalt blue
 
21 - 40 of 44 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top