E46 Fanatics Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
768 Posts
Discussion Starter · #1 · (Edited)
can someone please tell me the tools needed to install my replacement dinan filter throught the front wheel well?

thanks!

also, i see that the bracket that holds the filter to the tube is above the support plate. Is that easy to get to from the fender well?
 

Attachments

·
Registered
Joined
·
768 Posts
Discussion Starter · #3 ·
truwon said:
all you need is a screwdriver.
theres like 3 or 4 screws you have to remove from the wheel well that will give you access to your filter.
once you have it open, its no problem getting to the clamp that holds the filter to the tube.
:thumbup:
thanks!
 

·
Registered
Joined
·
768 Posts
Discussion Starter · #4 ·
truwon said:
all you need is a screwdriver.
theres like 3 or 4 screws you have to remove from the wheel well that will give you access to your filter.
once you have it open, its no problem getting to the clamp that holds the filter to the tube.
:thumbup:
anyone have pics of the front fender well removed (preferable with a dinan intake)? I'm trying to figure out if there will be enough room to get to the 8mm screws holding the filter support plate. I really want to remvoe this thing without taking off my front bumper!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top