[Bimmer4life2000]

I have a 2000 328ci and am looking for a used Dinan intake( I want the carbon pipe ). What should be included in the kit?

-Do I need the Bi xenon bracket? I have HIDs... :dunno:
-Will an intake from a 330 or 325 fit with out mods?
-What does the sock do?
-Can I use shark software instead of the dinan? there is no dinan dealer around here and cant have my car down for 2 days.

I did a search but could not find exactly what I was looking for. I know this has been beaten to death but I couldnt find any clear answers...

Thanks all!

Colin :thumbup: Here is what is included w/ the Dinan CAI sytem...
3 1/2" Intake Tube
Air Filter w/ clamp
Silicone Hose
Air filter bracket
Air flow meter bracket
80-100mm Hose clamp
90-100mm Hose clamp
Speed nut & screw
Xenon Headlight Bracket

This is what I got from my Installation Instruction manual... Part # D760-0400 (I have the carbon fiber tubing)

-Do I need the Bi xenon bracket? I have HIDs
Yes, you need to take out the ballast and use the bracket and install the ballast where the OEM air box use to be.

-Will an intake from a 330 or 325 fit with out mods?
It will fit, but the 330ci uses a bigger silicone hose I think.

-What does the sock do?
The sock is placed over the air filter to block water from getting sucked in.

-Can I use shark software instead of the dinan? there is no dinan dealer around here and cant have my car down for 2 days.
From what I have seen or heard on this board, you can run the Shark w/ the dinan CAI.

Hope this helps, if you need anything else, let me know...:thumbup:


Mike