E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 3 of 3 Posts

·
Registered
Joined
·
363 Posts
Discussion Starter · #1 ·
ok, so for sure i need to by extra wire to connect my DAE and "tap" them into my fogs, my fogs are the 2002 sportspackage bumper fogs.

FYI: i got my DAE from fiberdesign so maybe that will make a diff in length of wire

and if i do need to buy a wire what kind or whatever "the gauge number"
 

·
Banned
Joined
·
1,019 Posts
Not sure on the fiberdesign kit but there should be a blue wire coming from a relay. That wire needs to "see" 12 volts thus you can either wire to the fog light 12 volt wire or you can run it towards a switch.

AIM me: s4playko if you need help.

rk
 

·
Site Sponsor
Joined
·
18,128 Posts
DAE are probably wired up the same way as Gen IV.

That is the bulb probably receives a positive and negative wire.

However, unlike Gen V, there is no trigger, each light box probably requires that it be connected to a trigger point - in this case the fogs.

Don't worry, the bulbs have no polarity, so you can't mess it up:D
 
1 - 3 of 3 Posts
Top