BMW E46 Fanatics Forum banner

1 - 19 of 19 Posts

·
Registered
Joined
·
3,138 Posts
Discussion Starter #1 (Edited)
I had this on my E46 supercharged BMW 330i for about 3K miles. The can has been modded with custom ¾***8221; aluminum NPT barbs that connect right up to the BMW vent hoses. The stock can comes with wimpy 3/8***8221; barbs. The can worked great trapping a lot of gunk. Changing setup so I***8217;m letting this go. Selling for $200 shipped as shown. PM if interested.

The larger NPT barbs are at least $20 a piece, not to mention the custom machining to fit to the can, so price should be fair. Reasonable offers accepted.
 

Attachments

·
Registered
Joined
·
5,455 Posts
Glws
 

·
Registered
Joined
·
3,138 Posts
Discussion Starter #9
This would have zero benefit on a n/a motor correct?
It will catch and condense water as well as gunk. If you live in a cold place, this will keep your stock oil seperator from freezing and cracking.

how does it work?
It goes between the crank case outlet and the intake plenum and traps oil and water vapors. The oil can lead to buildup.
 

·
Registered
Joined
·
5 Posts
Do you have a picture of this on your engine? It may help folks, like myself, to see where it would install in the engine bay. I could use this on either of my M's or my 300ZXTT :)
 

·
Registered
Joined
·
1,060 Posts
Hey man I am seriously interested. Any more pictures and how does it mount? Looks like a bracket at the back in the pic but cant quite see.
 

·
Registered
Joined
·
3,138 Posts
Discussion Starter #18 (Edited)
Do you have a picture of this on your engine? It may help folks, like myself, to see where it would install in the engine bay. I could use this on either of my M's or my 300ZXTT :)
STORMER, PM answered. No pictures of the can installed. Sorry. Also, to provide more info, the can is 5" tall and 2.5" diameter.
 
1 - 19 of 19 Posts
Top