[Steel Blue]

I am planning on buying the H&R cup kit and M3 rear strut reinforcement this spring possibly:

1) Will I need to roll the fenders with my stock 17" rims?

2) Down the road when I upgrade to 18*8.5 (or 9.5) will I need to roll my fenders? (I am assuming yes)

3) I did a search about the reinforcement plate, and someone stated that it makes a noise. Why and what can we do about it?


Thanks in advance,
Mark
2001 325i Steel Blue

 

[mcabr]

Seems like nobody feels like answering this

so I will....

The rear part is a matter of putting the washers on correctly. The drop is not so severe that you will ever need to roll your fenders. Even with 18's you will be okay.

 

[Steel Blue]

MCABR- Thanks for taking the time to reply. One more question though. Do I need to worry about the offset? Or is that why I don't have to roll the fenders b/c I am not adjusting the offset.

Thanks again,
Mark
2001 325i Steel Blue

 

[BobbyBimmer]

Cup kit and 18's no problem and you wont have to roll fenders. if you go to 19's you will have to roll.

 

[BGReddy00]

ditto no rolling on the fenders-good choice in getting the cupkit though!