E46 Fanatics Forum banner

coupe headlight trim removal with headlight washers

1569 Views 3 Replies 4 Participants Last post by  PHAHEEM
I have headlight trim that I would like to install. I have read the DIY on this site but it says nothing about headlight washers. How difficult is this to do? What tools are needed other than a flathead screwdriver? Can someone post another DIY or thier experience when installing/removing headlight trim.
1 - 1 of 4 Posts
To remove the headlamp washers, stick a flathead screwdriver in there and pull them out manually...once you pull them out, hold on to it because it'll retract due to the springs in there, then with a little bit of force, pull out the top part of the washer, but be careful because it'll spray all over you. Once you've done that, then you'll be able to follow the DIYs. Good luck. :thumbup:
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.