BMW E46 Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
sup fellas!

just wanted to know if i should encounter any issues with 225/40/18 and a 35 offset on a 323i with the factory 15's on them...

let me know if i will be encountering any problems if i plan to lower the car using the h&r race set up (old school coils)...

if so, any suggestions in terms of camber, fender roll, etc...

let me know...

peace
 

·
Registered
Joined
·
95 Posts
Should be fine, with the hr cup kit at least 55mm front 35 mm rear. I am palning to put 18s with cup kit and 255 in the rear myself. :)
 

·
Registered
Joined
·
37 Posts
Discussion Starter #3
i wish i coud do the cup kit, but right now i have the h&r race springs and just waiting on the shocks, so no adjustability :(

now i just want to make sure that i'll be straight after the wheels and the drop...how's the camber in the bimmers after the old school way to drop, before the coilover systems became popular??

help a poor boy out!
 
1 - 3 of 3 Posts
Top