BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter #1
Looking to go with square VMR v701 in gunmetal or the new anthracite (eta?) on my Orient ZHP.

I would love to go with 18x9.5 et45 (for the concavity) with a 245/35/18 tire.

I am on stock suspension, but will consider lowering with probably just springs for now (either H&R Race or UUC v2)

Do you guys think these will work? I have no problem with rolling my fenders.

 

·
Registered
Joined
·
10,774 Posts
Unfortunately the +45 wont work up front due to inner clearance, but it will perfectly fine in the rear. You'll need a +33 up front and some camber adjustments to fit a 245. 9.5 +45 rears with a 245 will be perfectly fine.

I am currently running a 19x9.5 +33 with 255/30/19 Square setup on my Coupe. This required heavy modifications to the rear fender and at least -2.5 degrees of camber to fit the 255 up front with this height.

Feel free to shoot me a PM if you have any further questions. :)

[email protected]





 

·
Registered
Joined
·
73 Posts
So, you sold your chrome ZHP's? I'm thinking about looking for some clean stock ZHP's or another suitable stock size replacement or even going away from a staggered setup if possible.
 
1 - 4 of 4 Posts
Top