BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
700 Posts
Discussion Starter #1
Well, past few weeks, my SES light was on and gave me a CMPS code, so I changed both and I went out today to start the car, it took a few cranks to start it, then it started right up. If I gave it a little gas, just a little, the car shuts off.:bawling: But if I give it a decent amount of gas, car stays on. Now I turned the car off, and then restarted it, then the SES light came back on. Now im really pissed. :banghead: What could it be? The sensors are OE, and I herd that you have to reset the ECU in some cases? So atm I have the battery disconnected and will reconnect it in an hour or so. So if anyone has any advise, please say so. :bawling: Btw my car is a 2001 325i sedan.
 

·
Registered
Joined
·
12 Posts
Sorry man, wish I had something on this... My SES light just came on a couple days ago, car is still running great but I am DREADING replacing any censors...that' when the nightmares begin (from what I've read) Good luck.
 
1 - 4 of 4 Posts
Top