Joined
·
420 Posts
Didnt want to start a whole new thread so thought i'd just ask here. Today temp was down to about 0 deg C and i had to do a U turn in a big empty car park so i thought why not switch the DSC off and slide it a little :tsk: Well the car spun 180 degrees and the engine stalled, yeh i know my fault i should put the cluthch in, or even better not bothered to switch of the DSC!! So i start it back up and the Warning triangle light is on.
To cut a long story i too have the P0335 Powertrain: CKP Sensor A Circuit Performance fault code. Tried resetting it with my scan tool but no luck. Have i fried my sensor?? Its seems strange that a slide and stall would cause that.
The car seems to drive ok, just an extra turn or 2 before it starts up.
To cut a long story i too have the P0335 Powertrain: CKP Sensor A Circuit Performance fault code. Tried resetting it with my scan tool but no luck. Have i fried my sensor?? Its seems strange that a slide and stall would cause that.
The car seems to drive ok, just an extra turn or 2 before it starts up.
