BMW E46 Fanatics Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter #1
My car is idling very rough, sometimes car acts as i m pushing the gas without pushing the gas and RPM passes 1000-
Idles very low and in the morning it popes noises.
Misfires on all cylinders, i changed oxygen sensors, MAF sensor, ignition coils, IDC and seafoamed my car and still same problem.

Should i change my exhaust camshaft sensor?

Camshaft sensor causes misfire on all cylinders?

Camshaft sensor causes low idling?




1. P1397
Camshaft Position Sensor "B" Circuit (Bank 1)

2. P0130
Powertrain: HO2S Circuit Closed Loop (CL) Performance Bank 1 Sensor 1

3. P0150
Powertrain: HO2S Circuit Closed Loop (CL) Performance Bank 2 Sensor 1

4. P1189
Fuel Control (Bank 2 Sensor 1)

5. P1188
Fuel Control (Bank 1 Sensor 1)

6. P0302
Powertrain: Cylinder 2 Misfire Detected

7. P0303
Powertrain: Cylinder 3 Misfire Detected

8. P0301
Powertrain: Cylinder 1 Misfire Detected

9. P0304
Powertrain: Cylinder 4 Misfire Detected

10. P0306
Powertrain: Cylinder 6 Misfire Detected

11. P0305
Powertrain: Cylinder 5 Misfire Detected
 

·
Registered
Joined
·
242 Posts
btw if you're doing cam sensor, i'd replace them both at the same time
from my experience the other one usually goes bad shortly after the first
gl
 

·
Registered
Joined
·
3,325 Posts
Are these the codes from your OBD 2?
Why did you replace all those other things before doing # 1 on the list?
 

·
Registered
Joined
·
227 Posts
Discussion Starter #7
that's what i was thinking:hmm:
I have 95K on my 323CI-
So time to change 4x Oxygen sensors and the sparkplugs.
I have another E46 so i just swapped the MAF - Ignition coils -
and i dont know why i changed the IDC -


Now i need to know if the camshaft causes any misfire! i have misfire on all my cylinders -


Those codes from OBDII ( lapotp software )
 
1 - 7 of 7 Posts
Top