E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Premium Member
E30M3 Race F10 535 R1150Rt M Coupe
Joined
·
11,971 Posts
Though one.
If you're planning on keeping the car, you'll have to find a talented welder. Have that welded back closed. Also at the same time, have a body nut installed on the plate that closes the hole up.

Rust will soon ensue unless it's treated inside and outside of the welded areas.

The right person, not too bad. Most usually a roll cage fabricator or the like.
 
1 - 1 of 1 Posts
Top